Knot a Wine Rack…
January 16, 2011
It has been about a year since I started this blog. 2010 was one of the worst years I have lived through. Almost nothing went right, I never caught a break and almost every single thing I tried to do, blew up in my face. I feel like a complete failure.
Having said that, I’m not alone. It was hard for almost everybody I talk with. I got a message from WordPress telling me enough people viewed my blog to fill two 747 air planes. Lot of good it did. I got very few comments and even less interest in my wine racks. It’s very disapointing and some what frustrating.
I’m going to try an keep the shop going, but I don’t see how. I don’t have any emotional attachment to it really. Carpentry and wood working is what I have been doing for a living for a long time and I don’t really know what else to do. I going to try and keep going until I can’t anymore. I enjoy the work but it’s not who I am or what I’m about as a person, just a way to try and make money.
This is a piece I built last month for a lady. It is to be used as a night stand. The shelves are for shoes and slippers. She gave me some rough idea of dimensions that would fit in the room and how high it should be for a reading lamp.
I looked through my piles of hardwood lumber and dried logs, but there wasn’t enough to make all the parts I needed in the sizes I wanted. Here is a shot of some Clear Verticle Grain Fir that I re sawed. It came out of a nasty looking old 6 x 12 beam, salvaged from a construction site. While it had some defects and a big knot, it is beautiful material.
It must have been a giant old growth tree by the close growth rings and how many there are. I’m always in awe when I think that every grain was a year… we must be looking at decades… generations to grow this tree.
Here is what’s left of a 2 x 12 somebody gave me fifteen years ago. It has some curly grain to it that is very delicate and most gorgeous. I used it for the legs and the laminated edge-band on the top.
I love the look and color of fir. It is very difficult to work with because it can be splintery and it’s not hard enough to resist dings and dents in furniture. I went with it anyway because it was free. Here are a bunch of parts and you can see that I cut the drawer fronts out of the face frame and glued it back together so that the grain would run through.
Here I am with the tenon cutting machine I built, making round tenons to join the legs with the shelves. I call it the pencil sharpener, because it’s like sharpening big pencils.
When working with fir, you need to have very sharp blades, bits and planer knives or else you get heart breaking tear out or splinters. Sometimes you may run a bunch of pieces through the router table very carefully and think you have it licked… then WHAM, a blow out that rips the piece apart so that the material is wasted.
There are tricks to dealing with this like “Climb Cutting” where you run the work backwards agains the bit so it doesn’t grab the splintery grain…. or making multiple passes, taking a small amount at a time… or both. But, still you never know when the fir will bite you.
I was lucky this time, because I used every trick I know to machine all these parts right the first time. I barely had enough material to design this piece and no spare boards for mistakes and mishaps. In the end, there was barely enough scrap to kindle a fire!
I didn’t make the same mistake that I did on the last piece I built where I flipped the face frame in my haste to glue up the carcase. It’s subtle, but for those who know to look, they are rewarded with the grain running through the frame and drawer fronts.
I mortised my signature drawer pulls that matched the grain too. The last two from a batch of pulls I ran years ago. It takes six router set-ups to make them, so I do it in big batches of all kinds of woods so i don’t have to stop in the middle of a piece and make some.
The thing that took me the longest and was the most difficult, was to design the shelves. The boards I had were just too narrow to use. So I had to come up with a way to make them wider. I drew a dozen solutions but the one I liked the most couldn’t be built. I mean I could draw it, but there was no way to glue and assemble it… looked nice though.
The feature strip in the top is from my dwindling stash of old growth California Redwood. You can’t see in the photos, but there are small “Bird’s Eyes” in the Redwood.
There were two defects in the board I used for the field in the top. I could cut one out, but not both. So, the squiggle you see is a huge splintery check that ran through the whole beam. I glued it and clamped it. When it was planed off it came out smooth. Hey, it was made by hand! This ain’t IKEA.
I sprayed three coats of poly-urethane varnish on it, sanding between the first split-coat and second full wet coat. Then I rubbed out the top coat with double ought steel wool. It gets rid of any sheen and makes it velvety smooth to the touch. It’s virtually water and alcohol proof and pretty stain resistant too. Sometimes candle wax will stain it, but it is the toughest finish I know how to apply.
Over time, it will get used, dented, scratched and dinged. Like I’ve said before, some day after I’m long gone, somebody will pick this piece up, see my signature on the bottom and know that it took took time out of my life to make.
What Next?
Knot How It’s Supposed To Work…
November 22, 2010
It can start with a need. In this case, a friend has been remodeling his house and needed to put a key in a door at the end of a hall. All he told me was that he wanted a table to put a lamp on, so he could see the door knob, and that the space in the corner of the hall was 10″ by not more than 18″.
I like to have some kind of symmetry in my designs and the one dimension that seemed fixed was the 10″. Quickly I thought, how about 10″ deep by 15″ wide and 30″ tall… multiples of five.
I looked through my piles of wood and lumber for some walnut but didn’t really find anything that jumped out at me. I uncovered some gnarly pieces of Red Oak that my friend had given me last year and I’d completely forgotten about. I planed off the sides to see some nicely figured pieces.
They were just 29″ long, perfect legs for a 30″ table height. I squared them up on the jointer and thickness planed them. There were a few defects, checks, splits and splintery grain. I also thought because the piece was pretty small, I needed to cut them down so they would make sense within the scale of the piece. Hopefully I could cut out the defects too.
I fooled around with a bent piece of quarter round moulding that I use with a string to adjust the bow for marking curves. My idea was to make curved legs and cut out the defects. I cut a piece of plywood the size of the leg blanks for a template.
The hardest thing to do was figure out the sequence of cuts so I’d have a flat surface to run the against the fence and get a square part with which to join the carcase. Here is the first cut…
…then flip it 90 degrees for the second cut, and still have a flat surface to run against the table.
Legs.
That was the end of the day. I had a few random pieces of Red Oak in my stash but not enough to do much. I left the shop that night about eleven thirty in a driving rain. I got to the end of block where there is a new and used resteraunt supply business. They always have stacks of pallets and cardboard set out for the recyclers. There was an Oak counter with white melamine top and shelves sitting in the rain. I got out, kicked the particle board sides and top off it, and stuck these nice raised panels in the truck,
Nice stash of free material, except that when I cut them apart, the panels had been run through a sander or planer and were only 9/16″ thick. Couldn’t use them for a top like I hoped. Oh well, the styles and rails were still 13/16″, so I cut them up. I couldn’t use the panels, so I rummaged around and came up with this…
… a piece of Goncalo Alves that one of my shop neighbors gave me. It was an
off cut from a big board he used to make cabinet doors.Next I laminated pieces of
the Red Oak from the styles and rails on the salvaged counter and laminated
Black Walnut for the feature strips in my new top.
Next, I miter the edge band and…
… and glue the top together. Next I made the carcase sides, cut out the drawer front.
I make the pieces a little wider than I want, so I can rip the drawer front out and glue the frame back together. The you see the grain pattern run through the piece. At least that’s the idea. Next I machine the tenons for joining to the legs.
Next I machine the mortices in the legs on my router table equipped with an IPM fence. Same deal, it was harder to figure out the sequence of cuts, so I had a flat surface to run against the table and fence, than it was to machine the parts.
The IPM machine allows me to make extremely tight fitting joints. I have to make them at least sloppy enough, so that when they get wet with glue, they slide together and won’t wipe the glue off the joint or have to force it together. Every click of the detent wheel moves the fence a thousandth of an inch.
I sand all my parts then glue up. Unfortunately, in my haste to get everything square and true, I flipped the front backwards and by the time I realized it, I couldn’t pull it apart again, the glue dries that fast.
I know and you know, but nobody else will every know. I make runners that fully house the drawer, so I can have tight fitting drawers that slide smoothly and positively. I should have dovetailed the drawer sides, but once I have made a mistake that I can’t or don’t want to spend the time recovering from, I just want to finish and see if the overall design works for me. Still, I make traditional box joints to hide the dado for the drawer bottom.
The drawer bottom was a scrap of Jatoba. I looked through a big box of my signature drawer pulls. It took me years to come up with pulls that felt good in your fingers when you open the drawers. I make them by the dozens because it takes six router setups to create them. I don’t want to stop and make one in the
middle of a piece.
Unfortunately, I used all The Red Oak pulls on a previous table,
but at the bottom of the box was one I made from Spalted Apple. Here I route a
mortice in the drawer front to accept a tenon on the back of the pull. A perfect
color match!
Finally I put it all together, did some finish sanding and applied three coats of a
water based lacquer.
When I showed it to my friend, he told me his father had worked at a millwork company in Tigard, Oregon for thirty years and that the pieces he had given me, were rejected turning blanks he brought home to burn forty years ago. My only cash outlay was for the Lacquer.
I was disappointed that I didn’t get the grain to run through the front of the carcase, but I like the way the legs came out. I’ll put them in my repertoire and do better next time… maybe in Black Walnut.
My friend really like the piece and thought it was better that he envisioned.
Wine Enthusiasts Christmas Gifts…
October 26, 2010
What to get the wine connoisseur or alcoholic wino for Christmas? How about a counter top wine rack?
KTW #1810a
Gen-u-wine Knot Traditional Woodworks wine racks. Produced from local FAS Kiln Dried Alder lumber. (The Forest Stewardship Council is creating sustainable forests worldwide, producing and certifying sustainable lumber for a growing industry of green builders.) The through tenons in the bread board style tops are made from Oregon Black Walnut logs I have dried and milled.
15" x 15" x 14" tall
Further more, I machine parts and hand assemble these wine racks from rips and off cuts, gleaned from the custom upholstered furniture business next door. If I didn’t take it, they would burn it or put in in the dumpster.
I apply three coats of bar top poly-urethane that is stain resistant and virtually water proof. I use a flat sheen so that you can see the natural color of the wood and the grain, not a glossy wet looking finish.
Because my design is modular, I can make four bottle, six bottle and eight bottle racks, that will fit on a counter top or sideboard. I can build them with my miterd tops too… like this four bottle by two shelf model.
KTW #1710
Again, Alder hardwood with Oregon Black Walnut for the feature strip in the top.
23" x 15 1/2" x 14" tall
So many combinations and ways to construct these wine racks. I have some really interesting harwood logs that are drying but not ready to make parts out of yet. I would like to make these from Black Walnut or White Oak eventually too.
If you have some floor space, maybe a unique 36″ tall (counter top height), 20 bottle rack to display your collected wine treasures.
KTW #1610a
The checker board top for this piece was made from some kind of fruit wood, probably apple, for the light squares and Black Walnut.
These legs were milled from a very heavy, hard, dense, tropical wood that a friend of a friend got for me. He works for a lumber importer that was doing inventory and found these big planks buried under dust and debris for years. When they couldn’t identify the planks, didn’t know where they came from, I fortunately ended up with them.
The bread board ends are Sapele, the through tenons are Australian Lacewood and the shelf racks are Alder.
I cut out three of these racks, but only had enough material for two tops, so someday I will come across some nice lumber and make a different top on legs and shelves like these.
KTW #1610b
The top for this piece I made from Alder for the light squares and highly figured Balck Walnut for the dark squares.
23" x 15 1/2" x 36" tall
As much as I try make these in a production fashion, it’s still mostly one offs or two offs like these examples.
I tried to cut boards so that the dark figured grain pattern looks like it runs through lighter squares. My photographs don’t really do it justice.
About the time I get pieces ready to apply a sprayed on finish, I’m already thinking about ways to put the next ones together. There is still time to make some special presents. What is next?
Making Something Out of Nothing. What’s Next?
September 30, 2010
A friend of mine used to say that if there was and easy way, or a hard way, to do something… I will always choose the hard way.
Last fall I decided to try being a vendor at the Portland Saturday Market. Partly just to see if I could actually sell my products, but partly to get feedback about the whole wine rack idea, examples of my design ideas and craftsmanship. I told myself I would give it a year to see how the Market could work for me. If I didn’t try, I wouldn’t really know how it worked.
Above: A piece of fire wood I pulled from a stack. It’s some kind of fruit wood, maybe Apple, but could be from a Plum or Pear tree. Below: I cut some highly figured pieces of Black Walnut, this Apple log and contrasting pieces of Alder. then I cut a tongue and groove with my IPM Machine on a router table with up-cut solid carbide spiral bit.
The red and blue crayon marks are to tell me to route either a tongue or groove.
I tried to organize the pieces so that the grain pattern continues in order through contrasting light/dark pattern.
This experiment in joinery has one more row than the first top I made two months ago. People seeing this first wine rack top said, “Look Honey, we could play chess and drink wine!” I hadn’t even thought of that in terms of it’s graphic representation. I was just trying to make a big top out of small scraps of wood. This time around I added another row to make it look more like a real chess/checker board. I would need two additional rows to actually play a game on it, but this time it looks more like a game board. Because the tops are rectangular, the “squares” wouldn’t turn out square.
It is very time-consuming and tedious to machine parts and glue this up. Adding two more rows so it was a real game board would just add more work.
I still might try it some day but I need to drop back and punt as they say. For me the game is to design things around “FREE” material. It would be too easy to design beautiful, complicated woodworking ideas and just go to the lumber yard and buy expensive, highly figured exotic materials. In the end, I still need to sell them. That is the trick.
One of my neighbors at the shop gave me a two huge planks of some kind of tropical hardwood. He got it from a friend that works at a big wholesale lumber importer. In an inventory they found three big planks covered in dust at the back of the warehouse. Not knowing where the lumber came from or what it was, the friend gave it to my neighbor, who after a while had no use for it. So, it came to me. It is very hard, heavy and dense beautiful material. I used it for legs and rather than cut up big pieces of material, I used off-cuts and rips of Alder wood from my furniture building neighbors to make the racks.
KTW #1610a
It was a beautiful warm summer Saturday and the Market was pretty packed. Just as I hoped, hundreds of people were sucked into my little experiment! I can’t say it enough… If I had a nickel for every person that rubbed the tops, I wouldn’t have to sell them!!! Literally hundreds of people stopped to look at these two pieces and tell me that my craftsmanship was like art work. Great, just what I don’t need to hear anymore.
KTW #1610b
Above: You can see my first “checker board” top in the back. In close to three months, I still haven’t been able to sell it. Despite being told repeatedly that my prices were “very reasonable” or “too cheap”. I chopped fifty bucks off the price of it this day and still didn’t sell it! I tagged the two new pieces at $175 and reduced the prices of everything else at least $25. Very few folks looked at my other pieces or the checker topped piece in back for $125. I handed out a huge stack of business cards, flyers and talked to more people than I can remember about building them custom racks. Not only did I not sell one thing all day, but I never got a single call or e-mail for custom work.
KTW 1610b detail of top
Above: Traditionally styled bread board ends made from Sapele, and the through tenons are Australian Lacewood.
So, I’m coming up on one year of doing the Portland Saturday Market. What have I learned? Expensive lessons:
#1 The only people who are making money at the PSM is the PSM.
#2 Most of the PSM vendors are barely scraping by and many of vendors I talk to are going to quit.
#3 The public comes to the Portland Saturday Market just for cheap entertainment and the social hang out, not to actually buy anything. The economy in Portland is destroyed. If anybody has a job or any money… they ain’t spending it!!
#4 The people who run the Market have a hard task in trying to deal with a City hall and other public agencies that don’t really care to help the Market out. The Vendors who should care about the future of the Market and Market policy, don’t care at all. Having attended the last two membership members meetings with maybe twenty of the same long time vendors in attendance, and the three or four hundred vendors that show up each week conspicuously absent… apathetic would be a good description.
#5 If participation in the market, got my name/brand out there and worked as an advertising tool, it might be worth paying the monthly membership fee, daily booth fees. But to work all week, then get up early Saturday, set up the booth stand there all day, then pack up and go home for a twelve-hour day after not selling one thing to cover the cost of gas and lunch… I must be insane!
#6 I can’t afford to do the Market any more. The half-assed good Market days I had were off set by three bad days. It doesn’t look like this is the right venue for my endeavour. The PSM organizers don’t really care about me or most of the vendors for that matter. They know that there is no shortage of broke, laid off, out of unemployment insurance fools, that will give the direct marketing thing a shot.
The decision whether I should try to continue doing the Market is made for me. It’s not working for me anyway I slice it. I’m sure that there are other things I can try or do… but what ever it is, it needs to be easier.
Onward…
The Art of Being an Artist…
August 27, 2010
KTW #0305
I sold this console table at the Portland Saturday Market two weeks ago. I always ask folks who purchase my work, to send me pictures when my wine racks are in their new home stocked full of bottles. I got this photo in an e-mail. Pretty cool, my creation has found a good home. This piece was one of the first few prototype wine racks I built back in 2005. I had it in my house for a year or so, just to live with it, look at it and see how the glue joints and spray finish held up. Then it was in storage for a while and finally I need space in the shop, so I’m selling off my prototype/models.
I got to thinking about how I am keeping track of the products I make here in scenic Portland . I use a pretty simple system, The first two numbers are the sequence through year and the last two are the year. So this piece was the third one made in 2005, the year I built this shop and started branding the work.
Sutter Street circa 1989
In all the years I have built furniture, cabinets and woodworking projects in my shops, I never thought to sign the work. I ran across these photos recently and remembered how I began to sign and number my work.
In ’89 I was working off of scaffolding four stories off the ground, restoring the facade of an ornate old Victorian set of flats on Sutter Street in San Francisco. Somebody way in the past shot a gun into the air. Falling to earth, the bullet made a hole in the metal roofing that covered this conical roof. Throughout many years, water leaked into the attic through this dime sized hole. It drained into the front outside wall, down four stories all the way to the ground. With the exterior siding and trims constructed out of Redwood, they did not decay, but much of the wall and roof framing beneath it rotted away and the nails were crumbs of rust.
Above: a shot of the old rusted metal roof and the new galvanized sheet metal flashing I made to adhere the new “Torch Down” roofing membrane. Below: the finished roof.
My job was to gut the interior of the three flats and completely remodel the building. There was money in the budget to repair the facade of the building but not enough to address the horrible conditions that were hidden by 80 years of paint. My guys and I took most of the front apart to repair and replace the deteriorated framing and put it back together to appear as it did originally. We had a small carpentry shop set up in the basement, but much of the work of reconstructing the attic dormers and refurbishing the windows and trims, was done by hauling a table saw, chop saw, router table, etc, up on the scaffolding and cutting parts next to the work.
All of these big crown moldings I milled to match the existing shape down in the basement and then cut the joints up on a small platform. Meanwhile a painter spent three months stripping, sanding, prepping and priming the whole facade.
Above: Detail of galvanized metal flashing I fabbed in place. This shot is between the twin circle head dormers that light the attic, which I turned into a huge Master Bedroom and Bath with Jacuzzi. Everything on the exterior was caulked with a high-tech, flexible, paint-able adhesive caulking as it was assembled. I wish I could have used copper for the flashing, but there just wasn’t any money in the budget for any of this to begin with. It will still last another eighty years. Below: Owens Corning roofing material.
I can’t really relate how difficult and tedious it was to repair the siding and trims. It might have been easier and better to strip the whole front of the building and make it new, but there just wasn’t the money. Plus, we ran into costly problems restoring the curved windows and plumbing and mechanical issues too. When these places were built, they had gas light fixtures, no electricity, no hot water or heat.
Above: Column bases surrounding the attic windows. These dormers were the most time-consuming to repair, because the water leaked there first and the original construction was built to look good, not last for a hundred years of weather. Below: The circle head dormer roofs with new roof flashing.
I wish I had pictures of the interiors but these are the only photos I thought to take. The reason I tell this story is that I spent nearly a year of my life working on this building and had a few extremely close calls where I could have died in an instant.
October 17th, I called it a day for the first time in three months and sent my guys home ten minutes early. A few seconds later I was on the Central Freeway thinking, where is everybody? It’s rush hour and this place is deserted! I got out to the Candlestick Grade, saw the ball park and I remembered why we called it early… to go home and watch the World Series! That’s where everybody was. Seconds later, down by the SF Airport the magnitude 7.1 Loma Preita earthquake struck as I was driving.
Long story short, that part of the Central Freeway was eventually demolished from seismic failure. The building I was working on survived with minor drywall cracks. The seismic upgrades we did worked as designed. I had to go back and finish the job because the scaffolding rental cost a $1000 a week. The Saturday after the main quake, I was working on the pair of circle head dormers that lit the attic room. A 5.3 aftershock went off followed by a 5.2 about twenty minutes later. The scaffolding “walked” twenty-two inches down the street and didn’t topple over because I tethered it to the building. It got my attention for sure. We were so close to getting our carpentry work done, we just kept on going. People were streaming out of all the buildings surrounding us. The looked up at us and yelled, you guys are nuts!
My painting contractor was working on stripping 80 years of paint from the face of the dormers. He called me over to show me where the original carpenter had signed his work in a beautiful big flowing cursive scrip. I have built some pretty cool stuff for people with guts, vision and big checking accounts, but I never thought to sign my work. It was good enough to sign their checks.
Since I built my little shop here in the “UnderWorld”, I have been signing and dating the pieces I build. Not because I think it’s great work or that I am an artist, but simply to track my production and have inventory control.
I think my furniture pieces will probably outlast me. Who knows, someday in the 100th year of Antiques Road Show, the expert will see the serial #0305 and say this was an early piece, probably a prototype for what was to come. I wonder if that carpenter had any idea that his work would survive into the next century. In in ’04 I did a remodel/addition on a small commercial building here in Multnomah Village. The latest tenants have already torn off part of the front of the building and changed it again, so nothing lasts.
If the earthquakes hadn’t happened, I might have thought to add my name under his signature, or put a time capsule in one of the walls for some future restorer to discover.
I would like to think that my little pieces, just as objects, have a shot at surviving long after I am gone. I hope I can hang on here long enough to keep on designing and working. I have years worth of ideas and sketch books. As long as I can keep finding nice material, I think I can make pieces that people see and connect with. I hope I can continue to experiment and grow as a woodworker.
I feel like it has taken me five years be able to manufacture these wine racks pretty quickly on a small scale. Finding great material that will make the exercise worth my time and effort is going to be my biggest challenge.
When I look at objects, cars, buildings, art, etc, I always wonder about the minds that had the idea, drew the plan and made the things. I wonder how much time was spent, how much energy, how much frustration, what the feelings were at different points in the process. Was there a single person or a collaboration, different designers and builders? Were they pleased, disappointed or just glad to have work?
Someday a person that has done a little woodworking or is a person that has been involved in projects of any kind, might have the same thoughts looking at one of my pieces. They will turn it over and see my KTW brand and signature. They will know that they are looking at time from someone’s life.
The next trick is to figure out a way sell this stuff. The art of being an artist is getting paid for it.
The Experiment in Direct Marketing Continues
July 28, 2010
When I am a vendor at the Portland Saturday Market, wine festivals or street fairs, I hand out lots of cards and flyers to people who say they are interested in buying one of my wine racks or having a custom rack made for them. Very few of those people ever contact me. For a while there I didn’t know what to think. Maybe this is not the way to go about selling my products.
Possibly wine racks were something too large for purchase from a craft vendor, except that I have sold some of the largest wine racks I have ever produced to people who walked up, said, “Wow these are cool, I have been looking and have never seen anything like this!” Then bang, they whip out a couple hundred bucks cash and take them away.
I believed going into this, setting up a vendors booth at markets was partly to get my products out in front of people and get some feedback about them. Secondly, I might take orders for custom work, or have folks look on-line here at other inventory that I couldn’t bring out to show.
Finally a couple that talked to me at the PSM, e-mailed me and set up an appointment to come to the shop to see what kinds of wine racks I had. They ended up buying one of the larger pieces that got great comments every time I showed it.
There was another piece of furniture in the shop that they liked too. It was the first in a series of tables that I made a few years ago as a design exercise. They bought this one also.
I called them “eighth note” tables because I wanted the legs to look like musical notation. Back in my previous life as a contractor, I worked on a new house doing finish carpentry. The flooring contractors installed pre-finished Brazilian Cherry flooring throughout that house and two others next door. They made a huge pile of off cuts and mistake cuts to haul to the dump. I ask if I could have it. They said it’s all trash and they gave me some opened boxes of material that they couldn’t return also.
I wrapped the entryway columns with specially milled Mahogany
One of the most difficult jobs I ever tackled
You can see a stairway inside the front door. It was metal framed and I fabricated, installed 2″ thick Brazilian Cherry stair treads.
You can see the flooring material, and I salvaged left over material that was used to edge around the stair wells.
I planed the finish off the flooring and laminated pieces together for the legs and stretchers, then I took short off cuts left from the thick stair treads to glue up a laminated butcher block top with the thick edging material as the border.
The shelf was carved with a router jig out of a big piece I had in my lumber stash for many years. I think I got it at an auction.
This table was pretty tall at about 38″.
The second variation was a little shorter at 30″. When all was said and done I think I had something like 90 hours into this one table. Some exercise!
And this was a coffee table, more or less square at about 26″ in height. Once I did one the others were faster… but that is not saying much.
Thank you to Kristy and Deb for supporting my efforts. I’m glad they went to a good home!
Clear vertical Grained Fir and California Redwood with a marble tile top.
Wine Racks Made From Scrap Hardwood
May 18, 2010
About the time I get a piece or project sanded and start to apply the finish, I’m already thinking about the next variation or permutation of my design ideas. The Portland Saturday Market is in one respect, a brutal evaluation of the finished work. I’m too close to the work to have any objectivity and by the time it is done, I have mentally moved beyond. I’m already thinking two or three projects down the road. I’m wondering how I can come across more interesting material so I can try new ideas.
I keep hearing people tell me that I’m an artist. I wish. I’m just a craftsman… on a good day. A long time ago, somebody told me that the art of being an artist is getting paid for it. If that is the criteria, then for sure I ain’t there yet!
Last month, I used my shop time to build a machine that would help me with a woodworking operation, producing joinery at the heart of my wine racks. I have tried many different ways to make this joint and they all had different pluses or minuses.
Most of the stuff I used here was salvaged out of dumpsters. The motor is a nice old GE capacitor start, 1/6 HP unit, that came from a forced air furnace. The black metal frame came from a debris box at the back of a contract office furniture business a couple blocks away. The only things I had to buy were the bit on the right… a plug cutter that could also be used to cut round tenons… and, a 3″ pulley and three 1/2″ ID, ball bearing races, that mate with the shank of the cutter.
I had some scraps of Delrin in my stash of junk that I call my “Magic Bucket”. It is thirty year collection of weird pieces and parts you could never buy in a hardware store or supplier. I made two pillow blocks to house the bearings and mounted them on the board.
I saved these two pieces of junk years ago hoping that some day I might be able to build a thickness sander. The thing on the left is from an old Kodak photo enlarger and on the right is a crank from a cheap Delta bench top table saw I burned out.
I had no real plan other than in the end, I knew what I wanted it to do. I was making it up as I went along. I cut down the bracket holding the saw crank and re drilled holes so it was more compact.
I mounted a small table with a fence to hold parts. The crank in front moves the fence back and forth. The big knob moves the table up and down. Now I can cut accurate round tenons for my rack parts very quickly. The rack parts may be different dimensions, but it is easy to change the set-up for different sizes.
I’m always trying to build the parts for my wine racks with big pieces of material. It is easy to take small pieces of inferior lumber and glue them up into bigger pieces. But in the purest sense of wood working, big pieces simply look like what they are. Of course, many times big pieces of solid wood are hard to come by or more expensive. For production furniture factories, lamination or veneering give the appearance of big piece of wood. It is a cheap way to say that the pieces are still made from solid wood. One way around this for me, is to use joinery to make small pieces into big ones. Then there is no need to make excuses for the lamination, as it is on purpose and part of the design, not just a device to build products cheaply and efficiently as possible.
I had some chunks of Apple wood that I got from a dried stack of fire wood. I also had some odd nice pieces of Black Walnut. Look at the bottom right corner and there are some sample blocks I ran through the router table to make a tongue and groove joint.
It’s hard to see, but I cut a groove in the “bread board” ends of Black Walnut and the ends of the “field”. Then I glued a floating tenon of a contrasting colored wood into each to join them. I left the end of the floating tenon a little long so it stands proud of the table top. I’m trying to say, “look at the joints”, not ,”I don’t have any big pieces of lumber to use”.
On another note, with my new “Pencil Sharpener” machine, I can produce rack parts of different dimensions so much faster, that I changed the size of the cleats in the rack. In talking to wine makers, I found that bottle manufacturers are selling Champagne bottles cheaply. Many producers of Chardonnay and Pinot Noir are using these bottles. The glass is thicker even thought the inside volume is the same, it makes the outside dimension larger. My rack dimensions have worked for 90% of all the bottles I have come across, but these big bottles touch and it bothers me. So by making the cleats an 1/8″ of an inch wider, they fit easily without touching. It makes the racks look a little more substantial too. I like a substantial look. I’m still in the middle of my substantial look period, ha, ha, ha.
The frame and racks for this piece were made of Alder scraps gleaned from my neighbors who build really high quality upholstered furniture. Market goers see this checker board top from thirty feet away and gravitate right toward it.
I sit at the Market all day and every minute, I hear people walking by comment on how nice my stuff looks. Like I’ve said before, If I had a nickel for every person that rubbed the finished top of this piece and said, “Beautiful work man, you are an artist”, I wouldn’t have to sell this stuff.
I dropped my prices by a third to one half, just to see what would happen. Out of every three people who say, what a unique product, or what beautiful wood, great workmanship… one person will say, “…And your prices are very reasonable or even too cheap”. Many PSM vendors have told me to double my prices and then they would sell like hot cakes.
So, I sold a couple of pieces. It covered my vendor fees. I don’t think that prices have any thing to do with selling them or not. The market segment is a small one and only wine aficionados are the buyers. Thanks to those people, enjoy them.
McMinnville Wine & Food Classic
March 16, 2010
It was a lot of work but it was fun too. I met so many people and had some great conversations. I can’t say enough about the SIP Festival staff and volunteers . Very professional and competent throughout and they went out of their way to help me with my truck problems on Saturday night. The festival seemed well attended and there was a good party atmosphere. I met quite a few folks from out of state and at least as many people from the Portland area as locals.
The Evergreen Avation & Space Museum was an amazing setting. I had a chance to walk around the Space building all by myself before it was open to the public. I talked with a guide that had been an engineer. His knowledge of the history and how politics and events influenced the development of the space program was a great insight. I need to go back and spend time reading through all the exhibits and then go next door to the Aviation building and see the Spruce Goose.
Friday Morning was a little wet.
There was a spectacular array of wineries and the arts and crafts vendors and food vendors were very good too. I wish I would have had some time to walk around and maybe have a glass. I did get a sip of what my neighbors the Duke Family Vinyards, 2006 Pinot Noir was like… and I mean this as a compliment… it tasted like Kool Aid. It was so good and drinkable. One could drink a lot of this. I don’t know how to talk about wine and I would rather drink beer. Nevertheless, it was great experience. Then Dukes 2007 Pinot Noir was very different. From grapes grown twenty miles away from the ’06. Much more tannin, a little more bite and earthiness. It made me want a thick grilled steak.
Home of KTW fro 3 days, My neighbors the Dukes Family Vinyards
I got a minute to talk to my new buddy, Wende at Willamette Valley Vineyards and had a sip of 2008 Pinot. Great, great wine. I wish I had the vocabulary to express, but very rich and elegant. I only drink anything at all occasionally, so it is a real treat to taste these wines.
I was too busy to get to a friend I have known from high school. Ken Slusser of KathKen Vinyards in West Salem. I am planning on going to a couple of the concerts in the series they will be having at their vineyard this summer. Then I will have a proper chance to sample their wines. Ken said he makes a Port I would be interested in. It was great to be able to talk to him for a few minutes in passing. We were kind of working after all.
Saturday and Sunday were sunny spring days.
I had an OK weekend. I sold enough to cover the cost of the booth fee and a tank of gas. I got lots and lots of encouraging feed back about the work. I hope maybe one or two of the many people that ask or talked to me about custom work will follow through. The path of least resistance would be for me to put piece from my portfolio back into the rotation to build it for them when I can source some materials.
Thanks to all who bought wine racks from me. They went to good homes!
The view from my corner of the building...
Dukes Family pouring away...
There was pretty good live entertainment all weekend and way better that a lame Muzak track or something. Saturday evening Ellen Whyte sounded great from where I was and she played a long time I think. Love ya Ellen! Wish I could have been up close to see you, you are the real deal.
The old Datsun pressed into service for the Sunday retreat back to Portland...
Portland Seafood & Wine Festival
February 3, 2010
The experiment in direct marketing continues this weekend. If you are in town come see me at booth #1115. I think it is a corner booth.
I have heard radio spots all week and just saw a TV commercial. I think it is twelve bucks to get in and you get a hundred bucks worth of coupons for local restaurants, etc. Hey, the first three hundred visitors get and commemorative wine glass!
There are supposed to be fifty wineries in attendance. I believe that the application process for the wine vendors closed within a couple of weeks of last years festival. The organizers had 8500 visitors last years and expect a good turn out this year too. We will see!
I have been busy in the shop. I have a number of new pieces to take to this show. I have a bunch of stuff that got cut out but is in pieces on the bench. I had some problems with tools and a machine breaking, so I got a little behind. Still, I have more stuff to show that I have space.
Oregon Black Walnut... my favorite!
I try to get a bunch of projects glued up and sanded, so when I set up to spray finishes, I am more efficient with the time it takes for the process to apply all the coats. I hope to set up today and take photographs of my current inventory as I load it up for the show.
Number one… KTW#0104
January 9, 2010
In the winter of 1977 a nasty storm ripped a big limb from an old Black Walnut tree in my back yard in San Mateo, California. I chained sawed it into three foot long logs and sliced them length wise with a razor sharp Fanno pruning saw. My hands were left covered in blisters. I moved these pieces of Walnut around for years not sure what to do with them.
About 1994 I was doing a remodel in Palo Alto. One morning I came to the job to find a tree service cutting down a gigantic tree in the front yard. I ask what it was and the contractor said it was the biggest Apple tree he had ever seen. They cut it into fire wood, but I grabbed a couple 10″ thick branches about three feet long.
On one trip, when moving my shop to Portland, I towed a trailer with a stash of wood I had been air drying for many years. My wife looked at it and and said, “I know you are wood collector but you moved firewood?”
Most all the furniture in our house, I have built over time out of left overs from jobs or scavenged out of debris boxes. I can’t really afford to keep my own work anymore, but sometimes, I have so much time and energy into a piece that money can’t compensate me. This is my “Rotten Apple” table. It was the first project I built in my new shop out of the Spalted Apple logs and what was left of my Black Walnut stash. When I was done, there were barely enough scrap to kindling a fire. It is only 29″ tall because that is how long the log was.
It is finished with a traditional oil and wax. Over time, like most fruit woods, the color has become rich and dark. This piece was the inspiration for my first series of Wine Console Tables.
I love slicing up logs to reveal the treasures inside. I get pleasure in watching router or shaper bits peel away the grain. I could do this for the rest of my life and never get bored.
